Fire Safety Assessment - HSE Training and Certification Institute

January 26, 2025

Welcome to your Fire Safety Test. Attempt all questions.

You have 55 minutes after which the exam will automatically submit. Pass mark is 50%.

FULL NAME (HOW IT SHOULD BE ON YOUR CERTIFICATE) WRITE IN CAPITAL LETTERS ONLY

Location

Phone

What is the main purpose of a fire drill?

a) To test the fire alarm system only

b) To ensure employees know how to use fire extinguishers

c) To practice evacuation procedures and ensure everyone knows how to exit safely

d) To determine the effectiveness of fire extinguishers

None

Which of the following is NOT a recommended action if you are trapped in a room during a fire?

a) Seal gaps around doors with cloth or tape to prevent smoke from entering

b) Signal for help from a window or balcony

c) Open the window and climb out immediately

d) Call emergency services and provide your location

None

How should you handle a fire drill in a multi-story building?

A) Wait for an announcement before evacuating

B) Use elevators to evacuate quickly

C) Proceed to the nearest exit and avoid using elevators

D) Remain at your workstation until the drill is over

None

What is the correct procedure for using a fire extinguisher?

a) Pass, Aim, Squeeze, Sweep

b) Pull, Aim, Squeeze, Sweep

c) Push, Aim, Squeeze, Spray

d) Pull, Aim, Spray, Sweep

None

When is it appropriate to use a fire blanket?

a) To smother a small grease fire

b) To extinguish electrical fires

c) To cool down a burning building

d) To extinguish a flammable liquid fire

None

What is the first step to take when discovering a fire in a building?

a) Attempt to extinguish the fire immediately

b) Alert others and activate the fire alarm system

c) Gather your belongings

d) Investigate the source of the fire

None

What should you do if smoke is present and you need to escape a building?

a) Run quickly through the smoke

b) Stay low to the ground where the air is clearer

c) Hold your breath and walk quickly

d) Use elevators to escape

None

How often should fire extinguishers be inspected?

a) Annually

b) Every six months

c) Monthly

d) Only when used

None

Which class of fire extinguisher is suitable for electrical fires?

a) Class A

b) Class B

c) Class C

d) Class D

None

10.

Which of the following is an important practice for fire prevention in the workplace?

A) Storing flammable materials in a designated area away from ignition sources

B) Using multiple extension cords for high-wattage equipment

C) Blocking fire exits with stored materials

D) Overloading electrical circuits

None

1 out of 10

Fire Safety Test

January 26, 2025

Click submit to ensure proper submission!